Working Principle Of A Gate Valve

Aug 02, 2026 Leave a message

The opening and closing element of a gate valve is the gate; the direction of the gate's movement is perpendicular to the direction of fluid flow. Gate valves are designed solely for fully open or fully closed operation and cannot be used for flow regulation or throttling. The gate features two sealing surfaces; in the most common configuration, these surfaces form a wedge shape. The wedge angle varies depending on valve specifications-typically 5°, or 2°52' for lower medium temperatures. The gate of a wedge gate valve can be manufactured as a single, solid unit (known as a rigid gate) or designed to undergo slight deformation to improve manufacturability and compensate for machining deviations in the sealing surface angles (known as an elastic gate). When the valve closes, sealing can be achieved solely through medium pressure-where the pressure forces the gate's sealing surface against the seat on the opposite side-a process known as self-sealing.

 

However, most gate valves employ forced sealing, requiring external force to press the gate against the seat during closure to ensure a tight seal. Gate valves where the gate moves linearly along with the stem are known as rising-stem (or outside-screw) gate valves. Typically, the stem features trapezoidal threads; a nut at the top of the valve and guide grooves on the valve body convert rotary motion into linear motion-transforming operating torque into operating thrust. When opening the valve, the fluid passage becomes fully unobstructed once the gate has been lifted to a height equal to the valve's nominal diameter; however, this specific position cannot be visually monitored during operation. In practice, the fully open position is determined by the top of the stem-specifically, the point where it can no longer be moved upward. To prevent binding or seizing caused by thermal expansion, the valve is typically backed off by half a turn to a full turn from the maximum open position to establish the final fully open setting. Thus, the fully open position is defined by the gate's location-or travel-within the valve. In some gate valve designs, the stem nut is located on the gate itself; rotating the handwheel turns the stem, thereby lifting the gate. These are known as non-rising stem (or inside-screw) gate valves.

Send Inquiry

Send Inquiry