Product Details
Our cast iron flanged gate valve is a widely used on-off valve for low-pressure fluid pipelines. It adopts flange connection design and cast iron body, suitable for cutting off or opening the flow of clean water, sewage, air and non-corrosive light oil. When fully open, the gate stays inside the valve body, bringing minimum flow resistance and little pressure loss.
In addition, it also overcomes the defects of poor sealing, elastic fatigue, and easy rust of general gate valves. Cast iron flanged gate valve is a replacement product of traditional gate valve. It uses the elastic gate to compensate for slight deformation to achieve a good sealing effect. It has the remarkable advantages of light switch, reliable sealing, good elastic memory and long service life.
Drawing

Component
| No. | Part | Material |
| 1 | Body | Cast Iron |
| 2 | Disc | EPDM |
| 3 | Bonnet Gaskot | NBR |
| 4 | Stem | SS420 |
| 5 | Bonnet | Cast Iron |
| 6 | Thrust Washer | Brass |
| 7 | Thrust Stoove | Brass |
| 8 | Gland | Cast Iron |
| 9 | Hand wheeel | Cast Iron |
| 10 | Bolt | SS304 |
| 11 | Washers | SS304 |
| 12 | Dust Cover | NBR |
| 13 | O-Ring | NBR |
| 14 | O-Ring | NBR |
| 15 | O-Ring | NBR |
| 16 | Stem Nut | Brass |
Dimension
| Size | Face to face dimension(mm) | No.of turns closing | Flange dimension(EN 1092-2)PN10/PN16/PN25 | ASME 816.1/16.42CL125/150 | AS 4087PN10/PN16 | ||||||||||
| DN | DIN-F4 | DIN-F5 | BS 5163 | ASME B16.10 | AS 2638 | D | K | n-d | D | K | n-d | D | K | n-d | |
| DN40/1.5" | 140 | 240 | 178 | - | - | 9 | 150 | 110 | 4-Φ19 | - | - | - | - | - | - |
| DN50/2" | 150 | 250 | 178 | 178 | - | 9 | 165 | 125 | 4-Φ19 | 152 | 120.5 | 4-Φ19 | - | - | - |
| DN65/2.5" | 170 | 270 | 190 | 190 | - | 10 | 185 | 145 | 4-Φ19/4-Φ19/8-Φ19 | 178 | 139.5 | 4-Φ19 | - | - | - |
| DN8O/3" | 180 | 280 | 203 | 203 | 203 | 12 | 200 | 160 | 8-Φ19 | 191 | 15.5 | 4-Φ19 | 185 | 146 | 4-018 |
| DN100/4" | 190 | 300 | 229 | 229 | 229 | 12 | 220/200/235 | 180/180/190 | 8-Φ19/8-Φ19/8-Φ23 | 229 | 190.5 | 8-Φ19 | 215 | 178 | 4-018 |
| DN125/5" | 200 | 325 | 254 | 254 | - | 14.5 | 250/250/270 | 210/210/220 | 8-Φ19/8-Φ19/8-Φ28 | 254 | 216 | 8-Φ22 | - | - | - |
| DN150/6" | 210 | 350 | 267 | 267 | 267 | 17 | 285/285/300 | 240/240/250 | 8-Φ23/8-Φ23/8-Φ28 | 279 | 241.5 | 8-Φ22 | 280 | 235 | 8-018 |
| DN200/8" | 230 | 400 | 292 | 292 | 292 | 18.5 | 340/340/360 | 295/295/310 | 8-Φ23/12-Φ23/12-Φ28 | 343 | 298.5 | 8-Φ22 | 335 | 292 | 8-018 |
| DN250/10" | 250 | 450 | 330 | 330 | 330 | 23 | 395/405/425 | 350/355/370 | 12-Φ23/12-Φ28/12-Φ31 | 406 | 362 | 12-Φ25 | 405 | 356 | 8-022 |
| DN300/12" | 270 | 500 | 356 | 356 | 356 | 27 | 445/460/485 | 400/410/430 | 12-Φ23/12-Φ28/16-Φ31 | 483 | 432 | 12-Φ25 | 455 | 406 | 12-022 |
| DN350/14" | 290 | 550 | 381 | 381 | 381 | - | 505/520 | 460/470 | 16-Φ23/16-Φ31 | 353 | 476 | 12-Φ28 | 525 | 470 | 12-026 |
| DN400/16" | 310 | 600 | 406 | 406 | 406 | - | 565/580 | 515/525 | 16-Φ28/16-Φ31 | 597 | 540 | 16-Φ28 | 580 | 521 | 12-026 |
| DN450/18" | 330 | 650 | 432 | 432 | 432 | - | 615/640 | 565/585 | 20-Φ28/20-Φ31 | 635 | 578 | 12-Φ32 | 640 | 584 | 12-026 |
| DN500/20" | 350 | 700 | 457 | 457 | 457 | - | 670/715 | 620/650 | 20-Φ28/20-Φ34 | 699 | 635 | 20-Φ32 | 705 | 641 | 16-Φ26 |
| DN600/24" | 390 | 800 | 508 | 508 | 508 | - | 780/840 | 725/700 | 20-Φ31/20-Φ37 | 813 | 749 | 20-Φ35 | 825 | 756 | 16-Φ30 |
Product details
|
Media: Water Fluid |
Usage: Water/Waste Water |
|
Power:Manual |
Size: 2" -48" |
|
Application: Water, Oil, Gas |
Temperature of media: High Temperature, Low Temperature, Medium Temperature |
|
Warranty: 12 months |
Customized Support: OEM |
|
Brand name: ULIVETO |
Place of Origin: China |
|
Body material: Cast Iron |
Seat:EPDM/NBR |
|
Stem: Non Ring Stem |
Connection: Flanged |
|
Type:: Bolted bonnet |
Operation: Handwheel |
|
Flange: DIN2501/EN1092 |
Color: Blue |
Our advantages
15+ years in valves
We've made industrial and water treatment valves since 2009.
Our own 10,000㎡ factory
We run production in-house, so capacity and lead times stay under control.
Water treatment is our focus
Our valves are used in city water supply, wastewater treatment, and purification.
Full valve range
Gate, ball, butterfly, globe, check valves, Y-strainers, and wholesale cast iron flanged gate valve.
OEM cast iron flanged gate valve
Send drawings or samples; we make to your specs.
Quality checks at every step
From raw material to final test, we check sealing and pressure performance.
Export experience
We've supplied customers in many countries and know export packing and documents.
Quick response –
Our team replies fast and helps with valve selection and technical questions.
Our service
- Assist customers in selecting suitable valve models based on media, temperature, pressure, and other operating conditions.
- We are a professional cast iron flanged gate valve supplier. We can provide technical data such as product drawings, dimension tables, and material specifications.
- Support sample requests to help customers confirm product performance and appearance.
- Provide valve configuration and selection suggestions for water treatment projects.
- Clear quotations with specified delivery dates, payment methods, and trade terms.

FAQ
Q: What types of valves do you mainly produce?
A: As a cast iron flanged gate valve manufacturer,We mainly produce valves for water treatment and industrial water systems, including gate valves, ball valves, butterfly valves, globe valves, check valves, and Y-type filters.
Q: How do I choose the right valve for my project?
A: Please provide information on the medium, temperature, pressure, connection method, and dimensions. We will assist you in recommending suitable models.
Q: What are the connection methods for your valves?
A: We can provide flange, threaded, wafer, and welded connections, depending on the valve type and customer requirements.
Q: What materials are available for your valves?
A: Common materials include cast iron, ductile iron, carbon steel, stainless steel, and bronze, which can be selected based on water quality and operating conditions.
Q: Do you provide product drawings and dimension tables?
A: Yes, We are a professional cast iron flanged gate valve factory. we can provide drawings, dimension tables, material specifications, and other technical data for our main products.
Hot Tags: cast iron flanged gate valve, China cast iron flanged gate valve manufacturers, suppliers, factory, Cast Gate Valve, Double Flanged Gate Valve, Ductile Gate Valve, Flanged Knife Gate Valve, gate valve, Rising Stem Gate Valve

