Since ball valves typically utilize rubber, nylon, or PTFE for their seat seals, their operating temperature range is constrained by the properties of these materials. The shut-off function is achieved by the metal ball pressing against the plastic seat under the influence of the medium (in the case of floating ball valves). Under specific contact pressure, the seat seal undergoes localized elastic-plastic deformation; this deformation compensates for imperfections in the ball's manufacturing precision and surface roughness, thereby ensuring effective sealing.
Given that seat seals are usually made of plastic, fire resistance and safety must be considered when selecting the valve's structure and performance specifications. This is particularly critical in sectors such as petroleum, chemicals, and metallurgy, where ball valves are employed in equipment and piping systems handling flammable or explosive media.
Ball valves are generally recommended for piping systems characterized by: two-position (on/off) control; strict sealing requirements; handling of slurries or abrasive media; reduced-bore configurations; rapid actuation (quarter-turn operation); high-pressure shut-off (high differential pressure); low noise levels; potential for cavitation or flashing; minimal atmospheric leakage; low operating torque; and low fluid resistance.
They are also suitable for lightweight piping systems, low-pressure shut-off applications (low differential pressure), and systems handling corrosive media. Ball valves can also be selected for cryogenic (low-temperature) installations and piping systems. In the metallurgical industry, oxygen piping systems require valves that have undergone rigorous degreasing. For main oil and gas pipelines requiring underground burial, fully welded, full-bore ball valves are necessary. When flow regulation capabilities are required, specialized ball valves featuring V-shaped ports should be selected. In sectors such as petroleum, petrochemicals, chemicals, power generation, and urban infrastructure, metal-to-metal seated ball valves are suitable for piping systems operating at temperatures exceeding 200°C.

