1. Handwheels, handles, and actuating mechanisms must not be used for lifting purposes; impacts to these parts are strictly prohibited.
2. Double-disc gate valves should be installed vertically (i.e., with the stem in a vertical position and the handwheel at the top).
3. For gate valves equipped with a bypass valve, the bypass valve should be opened first (to balance the pressure differential between the inlet and outlet and reduce the force required to open the main valve).
4. Gate valves equipped with actuating mechanisms must be installed in accordance with the product's instruction manual.
5. If the valve is operated frequently, it should be lubricated at least once a month.
6. Gate valves are intended solely for fully opening or fully closing the flow of media in pipelines or equipment; they must not be used for throttling purposes.
7. For gate valves operated by handwheel or handle, do not use auxiliary levers during operation (if the seal is not tight, inspect and repair the sealing surfaces or other components). Rotating the handwheel or handle clockwise closes the valve, while counter-clockwise rotation opens it. Gate valves with actuating mechanisms should be operated according to the product's instruction manual.
Precautions For Gate Valves
Aug 07, 2026
Leave a message
Send Inquiry
