Check valves are also used in pipelines supplying auxiliary systems where the internal pressure might rise above the system pressure. They are primarily categorized into swing check valves (which rotate around a pivot point) and lift check valves (which move along an axis).
The function of a check valve is to permit fluid flow in only one direction while preventing reverse flow. These valves typically operate automatically: the pressure of the fluid flowing in the forward direction opens the disc, whereas reverse flow-combined with the fluid pressure and the disc's own weight-forces the disc against the seat, thereby shutting off the flow.
Check valves fall into this category and include both swing and lift types. A swing check valve features a hinge mechanism and a door-like disc that rests freely against an inclined seat surface. To ensure the disc consistently seats correctly, it is designed with a hinge mechanism that allows sufficient room for swinging, ensuring full and proper contact with the seat. Depending on performance requirements, the disc may be made entirely of metal or feature inserts of leather, rubber, or synthetic facing materials. When fully open, a swing check valve offers minimal resistance to fluid flow, resulting in a relatively low pressure drop. In a lift check valve, the disc rests on the seat surface within the valve body. Apart from the freely lifting disc, the valve's construction resembles that of a globe valve; fluid pressure lifts the disc off the seat, while backflow causes it to drop back onto the seat, cutting off the flow. Depending on operating conditions, the disc may be of all-metal construction or feature a rubber pad or ring inserted into the disc holder. Like globe valves, lift check valves have a restricted flow passage, resulting in a higher pressure drop compared to swing check valves, which offer less restriction to flow.
Working Principle of a Check Valve
Sep 02, 2026
Leave a message
Send Inquiry
