Types of control valves

Sep 20, 2026 Leave a message

There are many types of control valve bodies; commonly used ones include straight-through single-seat, straight-through double-seat, angle, diaphragm, low-flow, three-way, eccentric rotary, butterfly, sleeve, and ball valves. When making a specific selection, the following factors should be considered:
1. Selection is primarily based on factors such as the required flow characteristics and unbalanced forces.
2. When the fluid medium is a suspension containing high concentrations of abrasive particles, the internal valve materials must be hard.
3. If the medium is corrosive, it is best to choose a valve with a simple structure.
4. When the medium's temperature and pressure are high and subject to significant fluctuations, select valves with plug and seat materials that are minimally affected by such changes.
5. Flashing and cavitation occur only with liquid media. In actual operation, these phenomena generate vibration and noise and shorten the valve's service life; therefore, valve selection should aim to prevent flashing and cavitation.

info-1200-1200

Send Inquiry

Send Inquiry