Installation Methods for Check Valves

Sep 04, 2026 Leave a message

1. Swing Check Valve: The disc of a swing check valve is disc-shaped and rotates around a pivot axis located outside the valve seat passage. Because the internal flow path is streamlined, flow resistance is lower than that of lift check valves. They are suitable for large-diameter applications with low flow velocities and infrequent flow changes but are not recommended for pulsating flow; their sealing performance is inferior to that of lift check valves. Swing check valves come in single-disc, double-disc, and multi-disc varieties-categorized primarily by valve diameter-designed to mitigate hydraulic shock when the medium stops flowing or reverses direction.
2. Lift Check Valve: A check valve in which the disc slides along the vertical centerline of the valve body. Lift check valves must be installed on horizontal pipelines; for high-pressure, small-diameter valves, a spherical disc (ball) may be used. The valve body shape is identical to that of a globe valve (and parts are often interchangeable), resulting in a relatively high fluid resistance coefficient. The structure is similar to that of a globe valve, sharing the same body and disc designs. Guide sleeves are machined into the upper part of the disc and the lower part of the bonnet, allowing the disc guide to move freely up and down within the bonnet guide. When the medium flows forward, the disc opens due to the medium's thrust; when flow stops, the disc drops onto the seat under gravity, preventing backflow. In straight-through lift check valves, the inlet/outlet flow direction is perpendicular to the valve seat passage; in vertical lift check valves, the inlet/outlet flow direction aligns with the valve seat passage, resulting in lower flow resistance compared to the straight-through type.
3. Disc Check Valve: A check valve in which the disc rotates around a pin axis located within the valve seat. Disc check valves feature a simple structure but can only be installed on horizontal pipelines and offer relatively poor sealing performance.
4. Inline (Pipeline) Check Valve: A valve in which the disc slides along the centerline of the valve body. The inline check valve is a newer type of valve; characterized by compact size, light weight, and ease of manufacturing, it represents a key direction in the evolution of check valve technology. However, the fluid resistance coefficient is slightly higher than that of a swing check valve.
 Pressure-sealing check valves: These valves are used for boiler feedwater and steam shut-off applications; they combine the functions of a lift check valve with those of a globe valve or angle valve.

Send Inquiry

Send Inquiry