While offering good sealing performance, this design transfers the entire load exerted by the working medium on the ball to the downstream sealing ring; consequently, the sealing ring material must be capable of withstanding these operational loads, as the ball may shift under high-pressure surges. This structural configuration is typically employed for low- to medium-pressure ball valves.
In this type of valve, the ball is fixed and does not shift under pressure. Trunnion-mounted ball valves feature floating seats; under medium pressure, the seat shifts to press the sealing ring firmly against the ball, thereby ensuring a tight seal. Bearings are usually installed on the upper and lower trunnions of the ball to minimize operating torque, making this design suitable for high-pressure, large-diameter valves.
To reduce operating torque and enhance sealing reliability, lubricated-seat (or oil-sealed) ball valves were developed. By injecting a specialized lubricant between the sealing surfaces to form an oil film, both sealing performance is improved and operating torque is reduced, making them particularly well-suited for high-pressure, large-diameter applications.
Structure of a ball valve
Sep 16, 2026
Leave a message
Send Inquiry
