Product Details
For projects that need lightweight structure, easy replacement and reliable anti-backflow performance, the flanged wafer check valve is a highly practical pipeline one-way valve option. It combines the advantages of wafer lightweight design and flange butt installation, solving the problems of heavy weight and inconvenient maintenance of traditional check valves. This wholesale flanged wafer check valve is widely used in municipal water supply, building water systems and industrial circulating water pipelines for stable flow direction control.
Component
| Part | Material |
| Body | Cast iron or Ductile iron |
| Disc | Stainless steel 304 |
| Seating Ring | EPDM /NBR |
| Shaft | Stainless steel 410 |
| Spring | Stainless steel 304 |
Dimension
| Size | A | B | C | D |
| mm | mm | mm | mm | mm |
| 50 | 43 | 101 | 29 | 19 |
| 65 | 46 | 121 | 36 | 20 |
| 80 | 64 | 131 | 42 | 28 |
| 100 | 64 | 158 | 53 | 28 |
| 125 | 70 | 187 | 64 | 30 |
| 150 | 76 | 217 | 77 | 31 |
| 200 | 89 | 267 | 102 | 33 |
| 250 | 114 | 328 | 127 | 50 |
| 300 | 114 | 378 | 149 | 43 |
| 350 | 127 | 420 | 173 | 45 |
| 400 | 140 | 483 | 198 | 52 |
| 450 | 152 | 538 | 218 | 58 |
| 500 | 152 | 593 | 241 | 58 |
| 600 | 178 | 697 | 296 | 73 |
Product details
|
Media: Water Fluid |
Usage: Water/Waste Water |
|
Power:Manual |
Size: 2" -24" |
|
Application: Water |
Color: Blue |
|
Warranty: 12 months |
Customized Support: OEM |
|
Brand name: ULIVETO |
Place of Origin: China |
|
Body material: Cast Iron/Ductile Iron |
Seat:EPDM/NBR |
Our advantages
Compact and light - fits where others can't.
Compared with the older-style flange check valves, this one is noticeably slimmer and lighter, which matters when you're working with dense piping and tight installation spaces. It's also easier to handle on site: lining it up and getting the bolt holes matched takes far less fiddling than a bulky traditional body.
Bolted flange connection - stays put under vibration. It uses standard flange end faces with even bolt tightening, so the joint holds firm. Even when the line vibrates or water hammer hits, the valve won't loosen, shift, or start weeping at the interface. Set it up right once and it stays that way.
Closes the moment flow stops - protects what's downstream.
The precision sealing structure lets the medium pass through smoothly in the forward direction, then cuts off quickly when the pump shuts down. That stops the pump from spinning backward and takes the sting out of the backflow pressure spike - which is exactly what keeps pumps and downstream equipment running longer without damage.
Streamlined bore - no wasted pressure.
The internal flow path is clean, with no unnecessary obstructions, so the valve doesn't throttle the line or eat into your flow rate. On long runs or continuous supply duty, that lower resistance adds up to real energy savings over the years.
Simple, tough, and priced for volume.
There isn't much in this valve that can fail, so failure rates stay low and it needs no frequent maintenance. For standard civil and industrial piping jobs, it's hard to beat on cost-effectiveness - and if you're buying in batches for a project, the per-unit price gets even friendlier. That's the kind of valve you can spec without losing sleep.
Product features
Lightweight integrated valve body
Compact integral casting design, small occupied space, easy for handling and on-site installation.
Flexible swing disc structure
Swing disc opens and closes sensitively, ensuring smooth flow and fast anti-backflow cutoff.
Precision sealing surface
Fine machined fitting surface, tight shutoff without leakage under rated pressure.
Standard flange size
Compliant with international standard dimensions, compatible with most pipeline flange fittings.
FAQ
Q: What is a flanged wafer check valve used for?
A: It's a lightweight one-way valve - it lets water (or whatever medium) flow forward and slams shut the moment it tries to flow back. You'll see them in water supply and industrial pipelines, usually installed right after a pump, so the pump and downstream equipment don't get hammered by backflow when the pump stops or the line surges.
Q: Wafer check valve vs swing check valve, which is better?
A: There's no blanket winner - it depends on your job. We make both at our flanged wafer check valve factory, and here's how we put it to customers: the wafer type is thinner, lighter, and slips between two flanges with a simple bolt-up, so it's ideal for compact layouts where space is tight. The swing type is a heavier build, better suited to large-diameter, heavy-duty lines that see rough service. So in short: tight space, moderate pressure → wafer; big bore, demanding duty → swing. Tell us your size and duty and we'll point you the right way.
Q: Is this valve suitable for vertical pipelines?
A: Yes. It installs on both horizontal and vertical runs, with one rule: the flow direction has to be correct. The arrow cast on the body should point the way the medium actually flows - get that right and it works fine on vertical pipe too. If your layout is a bit unusual, send us a quick sketch of the line and we'll confirm suitability before you place the order, so there's no surprise at installation.
Hot Tags: flanged wafer check valve, China flanged wafer check valve manufacturers, suppliers, factory, Cast Iron Check Valve, check valve, Dual Wafer Check Valve, Ductile Iron Check Valve, Flanged Check Valve, Soft Close Check Valve

